Fully Metal Free Ffp2 Valved Mask , Light Disposable Particulate Respirator

CE Approved FFP2 Valved Mask , Dolomite Dust Mask, Dust Particulate Respirator Mask​

1 . Descriptions

2 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator performance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

3 . Packing

The normal package of this cup mask with valve is 10pcs/box , 20box/carton and the size of the carton is 62*27*34 cm.

4 . Discard and replace the mask if:

1. The mask is removed whilst in the contaminated area.

2. Clogging of the respirator causes breathing difficulties.

3. The mask becomes damaged.

4. For respirators protecting against vapours,the smell of vapours present becomes derectable.

5. When the respirator is not used,the sliding elastic bands allow to hang up the mask around the neck.

6. During any activity in which respiratory conditions are abnormal and in which there is a high respiratory risk, it is necessary to protect oneself by using an appropriate respirator, which must be chosen according to conditions of the air and the quantity of oxygen and contaminants in it.

5 . More pictures